Improving Your Property - Helping you improve your property

Boxing in pipework :: Posted by: Admin on January 13th, 2014

Boxing in pipework

Boxing in pipework

Pipes such as heating pipes or waste pipes can look ugly and can be a dust trap, they can be hard to clean and even paint around. The ideal solution is to box pipework in, once they are boxed in, the box can be decorated the same as the surrounding area, such as tiled or painted.

Typically to box in pipework you use timber battens and plywood or MDF, the battens are normally 2×1 inches (50×25 mm) or 2×2 (50×50 mm). The plywood or MDF can be 6 or 9 mm. All of the materials used will depend on the circumstances you plan to box the pipes in. You may even wish to use plasterboard and plaster the box.

Tools required for this job

  • Battens (2×1 or 2×2) (50×25 mm or 50×50 mm)
  • Drill
  • Drill bits
  • Screw or panel pins
  • Spirit level
  • Screwdriver / drill with screwdriver bit
  • Hammer
  • Plywood, MDF, Plasterboard
  • A pencil
  • Tape measure

How to box in pipes

Take the battens and hold them against the wall, use a spirit level to ensure they are upright and level, next drill holes through the wood into the wall, use rawl plugs and screws to fit the batten to the wall ensuring they are level.

Once the two wall battens are fixed you can cut the plywood to the correct size, fix a batten on the outside corner of one of the pieces of plywood, this will allow you to screw the other length of plywood to it giving the external corner a good strong fixing.

Decorating the box

Once the boxing in is done you can decorate the box, if you are painting the box, fill the screw holes and rub them down then apply the appropriate paint to match the surrounding area, you may have to prime the box first to seal the plywood. If you are tiling the boxing in, cut and fix the tiles to match in with to other tiles. You can add skirting boards to horizontal boxing in to match the room, and coving to vertical boxing in to make the box become part of the room and once decorated should like it has always been there.

Horizontal and vertical pipes

The same method for boxing in applies if you are boxing in horizontal or vertical pipes.

You can box in heating pipes, hot and cold water pipes, soil pipes and waste pipes to tidy them up and make them look part of the room.

Tags: , , , , , , , , ,
Posted in Building, Decorating, DIY Tips, Handyman tips, Plumbing, Woodwork | No Comments »


Leave a Comment

Top

My Paintbrush logo

Copyright © 2012 - 2017 Adrian Rayfield. All Rights Reserved.
This blog is protected via Copyscape Protected by Copyscape Online Infringement Checker Please do NOT infringe our copyright.
Entries (RSS) and Comments (RSS).
We currently have: 35 posts :: We also have 49 comments, why not have your say?

Admin - Log in