Improving Your Property - Helping you improve your property

How to Install an Outdoor Tap :: Posted by: Admin on July 20th, 2013

How to Install an Outdoor Tap

Outside taps are essential if you use a garden hose to water the garden, use a sprinkler, irrigation system or even just a pressure washer to clean the patio or car. If you have not already got one you may be thinking it is going to cost a lot of money to call a plumber in to do it. Well if you are confident enough you can fit an outside tap yourself by using an outside tap kit readily available in hardware stores.

In this post I will describe how to fit an outdoor tap but you can also watch the included video to see how it is done. As with all plumbing jobs, if you are not sure how to do it, call a professional plumber to give advice or do the job for you, you do not want to end up ankle deep in water.

If you buy an outdoor tap kit you will have everything you need to install the tap, including an isolator tap.

Outside tap with hose fitted

Tools required

You will need the following tools:

  • An Outdoor Tap Kit
  • Masonry Drill Bits (6mm and 16mm)
  • Screwdrivers
  • Adjustable spanner
  • PTFE (thread tape)
  • A Sharp Knife

Installing the water supply pipe

To install the water supply you need to connect to an existing copper water pipe. This is done by using a self cutting isolator tap to cut into the copper pipe. You should clean the copper pipe, remove any paint with a scraper or knife in the area you are going to install the isolator tap.

Remove the isolator tap from the clamp and attach the clamp to the copper pipe in the place you wish to have the isolator tap. Ensure the clamp seal washer is correctly in place before tightening the clamp to the copper pipe.

When the clamp is in place take the self cutting isolator tap and place it into the clamp hole making sure the isolator tap is turned off, be careful not to cross thread the tap, screw the isolator tap clockwise until the cutter has cut a hole into the copper pipe.

Once the isolator tap has cut a hole into the copper pipe you need to secure the tap by using the back nut onto the clamp. You can test the isolator tap now by turning it on, catch the water in a bucket, the turn the isolator tap off again.

Once you are happy the isolator tap is fitted OK and working, you can connect the water supply flexible hose to the end of the isolator tap.

You should now drill a 16mm hole through the wall if you are having an external tap, but if you are having the tap in say a garage you do not need to do this stage. If you are drilling a hole, do so now and push the water supply flexible hose through the hole.

You can now move on and fit the outdoor tap.

Installing the outdoor / garden tap

Once you have the water supply to the location of your outdoor tap you can then install the tap.

Take the backing plate / wall mounted connector, the water inlet and the tap and wrap some PTFE (thread tape) around the threads to ensure a watertight seal. Wrap the PTFE tape around the thread a few times of both the inlet and the tap. The screw the inlet onto the backing plate / wall mounted connector and use an adjustable spanner to tighten this onto the backing plate.

Now decide where you wish for the tap to be fixed to the wall, mark the holes using the backing plate and drill and rawl plug the holes, then screw the backing plate onto the wall.

You now need to cut the water supply flexible pipe to the correct length, you can cut the pipe with a sharp knife, once you have done this you can push the pipe onto the water inlet on the backing plate, secure the pipe using a hose (jubilee) clip.

Next you can screw the tap into the backing plate / wall mounted connector, tighten the tap into the connector with adjustable spanners.

Now the tap is fitted and you have the water supply connected up you can attach the hose adapter or whatever fitting you have for the tap.

Finally, you can turn on the isolator tap to allow water down the water supply hose and to the outdoor tap, then undo the tap and test the function of the tap.

You have just fitted an outdoor tap.

How to Install an Outdoor Tap video

Watch this video to see step by step stages of how to fit an outdoor / garden tap.

Tags: , , , , , , , , , , ,
Posted in DIY Tips, Gardening, Handyman tips, Plumbing, Video | No Comments »


10 ways to improve your property :: Posted by: Admin on July 11th, 2013

Graphic of house on scales with money on other end

10 ways to improve your property

If you are thinking of selling your property or simply want to give it an update but wish to add value to your property also, the following 10 ways to improve your property is a good start. They are in no particular order of importance, cost or value adding potential.

As with all improvements you need to decide the reason behind them, if it is to add value to your house you should always research the local area to find out if doing a job will actually add value. If you just want to update your house for you then it is less of a consideration but be careful not to do things to devalue your property.

Garden – Do you have kerb appeal

Is your garden in need of some work, is the grass up to your knees or does it resemble a jungle? The first thing people see as they come to your property is your garden. Simply by keeping it neat and tidy will increase the kerb appeal. Simple things such as weeding the borders, cutting the grass and having well planned all year round plants is maybe all you need to do. If you wish to go a stage further you could use weed control membrane and coloured slate, some coloured pots and maybe even block pave the driveway, this is obviously more expensive but will improve the look and initial appearance of your home.

Environmentally friendly house

Is your property Environmentally friendly? Many people are looking to buy houses that are Environmentally friendly nowadays, for example short flush toilets, double glazed windows, water collection devices such water butts to recycle rain water or condensing boiler. All these things could not only benefit you, the home owner, but also the environment and are all good selling points.

New kitchen?

The kitchen for most homes is the hub of the house, it is where you make meals, maybe eat, and often meet other family members from the household passing through, it can be the organisational hub also with notes stuck on the fridge. A kitchen is also a great selling point of a property, does your kitchen look old and tired, is it 20 years old? There is nothing wrong with an old kitchen, they will often last for years it’s just the fashion and trends that change but the carcass or the kitchen maybe nearly as good as new.

Instead of ripping the entire kitchen out why not consider either having it painted or just replace the doors and worktops to give your kitchen a modern look and feel. There are lots of companies offering replacement doors and worktops online. And you can save yourself a small fortune at the same time.

Bathroom

Everyone likes a nice bathroom, a nice suite and well heated. So if your bathroom isn’t that welcoming you may consider doing it up, especially before selling. You don’t, unless you want to, need to install an entire new suite, replacing taps and getting rid of that old wooden toilet seat and replace it with a new one or a plastic one could be an idea.

Adding a few tiles could brighten up a bathroom and make it easy for mopping up splashes, especially around the bath or basin. Re-grouting your existing tiles could make the bathroom look cleaner and more appealing to potential buyers.

Another consideration is flooring, carpet may seem a good idea and feel nice on your feet in the morning but if your selling your house people may prefer a tiled floor or a vinyl flooring as it is more hygienic and easier to keep clean.

Flooring – carpets or hardwood flooring

Flooring is a large expense so you have to make to right decision, do you go for carpet or a laminate or hardwood floor? If you have cats or dogs a laminate or hardwood floor maybe a better choice than carpet. A dark carpet rather than a light coloured one would be best in a high traffic area, such as by a front or rear door. Hardwood and laminate floors are quick and easy to keep clean, simply brush them over with a broom.

The expense has to be a consideration also, especially if you are thinking of moving. Saving that worn out carpet will not help sell a house whereby a nice hardwood floor may do.

Storage

Storage is always a problem in most households, there is never enough space to keep everything we have nowadays. If you can build storage space it will certainly improve your properties look as all the clutter can be put away. For example, can you make a window seat with storage under the seat? Maybe you can build cupboards under the stairs, or build a toy box for the end of the kids bed.

Any space that can be utilised for storage will make your home run better and could add value to it also, as people always look for storage spaces when viewing a property.

Build

If you have the money you could always build, either an extension or convert the loft maybe, but you don’t have to go for a full on build, simply re-thinking a house and altering it may make the house work better and add value, for example adding an en-suit. A garden room or conservatory is another way of extending and would make a great play room for the kids, or a nice quiet place to relax in an evening.

You could also consider a garage conversion if you don’t use your garage for a car, but consider this carefully as it could affect the selling price later on.

Redecorate -Interior

It may seem obvious but redecorating is a relatively cheap way of improving your property, all houses need to be decorated from time to time as the d├ęcor gets tired and may suffer from the knocks and scratches of everyday life. Buying a tin of paint and painting a room can transfer how it looks, bringing it up to date by using a fashionable colour perhaps.

Adding wallpaper, even a feature wall can make a room more sophisticated and doesn’t have to cost the earth.

Redecorate – Exterior

The exterior of your house is just as important if not more so to maintain. Keeping the exterior paintwork such as fascia’s and soffits, doors and windows painted will keep the weather out and reduce the risk of them rotting.

Masonry also needs to be kept in good condition to stop damp from getting in.

Having a well maintained house gives a property great kerb appeal and could help sell a house.

Insulation

Cavity and solid wall

Sounds boring doesn’t it? But a well insulated house will have smaller energy bills than those houses with minimal or no insulation. Cavity walls and loft insulation can be done at any time and you may even be able to get a grant to help with the costs. If you haven’t got cavity walls you could line the walls with a thermal liner to reduce heat loss.

Upvc windows and doors with special coated glass will keep the cold out, look for the highest rated glass when you have them fitted. Also adding Upvc windows and doors is nowadays a great selling point as not only does it reduce the energy bills but also noise and or course there is no maintenance except cleaning them.

Tags: , , , , , , , , , ,
Posted in DIY Tips, Gardening, Handyman tips, Plumbing, Woodwork | No Comments »


Spring clean – Cleaning your garden furniture :: Posted by: Admin on May 15th, 2013

Spring clean – Cleaning your garden furniture

After the long cold winter we have just endured the garden looks a little worse for wear, but now we are getting some warmer spring like days it is the perfect time to get out into the garden. Apart from cutting back and pulling out the winter bedding plants and cutting the knee length grass, the garden furniture (unless kept in a shed or garage) will be in need of some tender loving care.

If you have plastic garden furniture you will have less work to do, if you have wooden furniture it does need looking after and the spring is the ideal time to do it, ready for the summer.

Plastic and metal garden furniture

If you have plastic or metal garden furniture all you really need to do is either pressure wash them off and dry them or use a bucket of warm soapy water and a sponge or cloth to wipe them over and remove the ground in winter dirt and grime. Check for condition, and check for rust on metal furniture and treat as required.

Wooden garden furniture

If you have wooden garden furniture you need to spend a little time cleaning and protecting them. A lot of garden furniture is simply oiled with teak oil to protect them from the elements. Some furniture may be painted or stained, but whatever they are protected with, a good clean is needed first.

Ideally a pressure washer is the perfect tool for the job, a quick blast from one of these and you will remove the grime, once you have washed the furniture down, let it dry before doing anything else to it. If you do not have a pressure washer, a bucket of warm soapy water and a nail brush and then a good rinse will do.

Check the condition of the furniture, has any of the seat slats rotted over the winter, if so you will need to replace them. The last thing you want is the mother-in-law to come round for a barbecue and sit on a chair and fall through it!

Once any repairs have been carried out you can get on with protecting the furniture, if you have stained wood give it a light rub down with sandpaper before coating it, if the furniture is painted a colour, with a gloss for example, you should treat this as you were painting any wood on your house. Give it a rub down, an undercoat and then a topcoat.

If you have furniture that is oiled rather than stained or painted, allow to dry after washing and rub it down to remove any ‘furry’ bits. Once it is smooth you can oil it with an oil such as teak oil, use a rag to apply the oil, leave to soak in and then apply another coat. Apply 3-4 coats for good penetration and protection. Allow 24 hours to dry before using the furniture.

Once you have cleaned your garden furniture you’re set for the summer. When it comes to the winter, if you have the space it is always best to put the furniture in a shed or garage but if this is not possible consider covering it up for the winter, it will mean one less job for next spring.

Wooden garden bench

Tags: , , , , ,
Posted in DIY Tips, Gardening, Handyman tips | 2 Comments »


Putting up fencing :: Posted by: Admin on February 6th, 2013

How to erect fencing

If you are planning to put up a new fence or simply replace an existing one, it is a good idea to tell your neighbours your plans and ask them to remove any breakable pots or tie back treasured plants and also ask them for permission to go onto their property if required.

You will also need to check the boundaries of your property and make sure you know which side is your fence and which is that of your neighbours. If you are replacing a fence then follow the old fence line but if you are putting up a new fence make sure you mark the boundary before starting. You may also want to check with the local planning authority you are allowed to erect a new fence and the height you are allowed to go to.

Before you buy

Remember that if you buy a 5 foot high fence, the post needs to be 7 feet tall as 2 feet will go into the ground, if you are going to use a gravel board and a 5 foot fence you will need allow for this also for the length of post.

This blog post deals with erecting a new fence with new panels and concrete posts but the principles are the same for wooden posts or metal spikes.

Tools for putting up a fence

You will need the following tools, it may also help to have a friend help you lift the posts and fence panels.

  • A Spade
  • Gardening Gloves
  • A String line
  • Fence panels
  • Concrete Posts
  • A Spirit Level
  • Bags of PostFix (pre-mixed sand gravel and cement)
  • A Tape Measure
  • A Saw
  • Gravel Boards (optional)

Getting Started

The first thing you need to do is mark the boundary, use a string line for this. Once you have your straight line you need to work out where the first post will go, this maybe up against the house. You now have to dig the holes and fix the posts.

fence panels and fence posts

Fixing the fence posts

You will need to dig holes for each post, each post should be 18-24 inches in the ground, and the hole should be around 3 times as wide as the post, as a guide the hole will be about the spades width and the spades blade and a half deep.

Once you have the correct size hole drop the post into the centre of the hole, upright it using the spirit level. At this point you can secure the post by dropping a couple of half bricks or large stones to wedge between the post and outer edge of the hole. If you have a friend helping you you can get them to hold it upright for you. Now tip half of the dry PostFix into the whole, then add water as per instructions on the bag. Keep checking the post is upright, then tip the rest of the PostFix into the whole and add water. Allow the given time to set. Do this with all the posts.

Make sure the gap between each post will allow for a fence panel, you can either stand the panel in it’s place whilst you fix the next post, or if you are using gravel boards, use these as spacers.

Fitting the fence panels

Once all the posts are fixed and the concrete is set, if you haven’t done so already and you are using them, fit your gravel boards. Next lift the fence panels into place by slotting them into the groove on the posts, you may need two people to do this. You may want to wear garden gloves to avoid splinters.

How to cut fence panels

If you need to cut the width off a fence panel because the gap between the posts are smaller than the panel, you will need to cut the panel down to fit. To do this carefully remove the end baton, then measure between the groves in the concrete posts and mark this on the fence, cut the top and bottom baton allowing for the width of the side baton. Then re-fix the side baton and finally cut down the edge of the side baton trimming the unwanted part of the panel. Your panel should now fit snugly between the two posts.

Tags: , , , , , , , ,
Posted in DIY Tips, Gardening, Handyman tips | 3 Comments »


Top

My Paintbrush logo

Copyright © 2012 - 2017 Adrian Rayfield. All Rights Reserved.
This blog is protected via Copyscape Protected by Copyscape Online Infringement Checker Please do NOT infringe our copyright.
Entries (RSS) and Comments (RSS).
We currently have: 35 posts :: We also have 49 comments, why not have your say?

Admin - Log in