Improving Your Property - Helping you improve your property

Colour of the year 2017 :: Posted by: Admin on December 20th, 2016

Colour of the year 2017

Colour Trends For the coming year 2017

Dulux Colour Futures™ from AkzoNobel have again, as they do every year, come up with what they think the upcoming colour trends for the coming year will be, through their international research they have selected a range of colours they think will be on trend throughout 2017, this year there is an interesting contrast between bolder, more striking colours and a selection of muted, lighter shades.

swatch-87bg-27-077

What Is To Colour For 2017

The colour of the year 2017 is…… 87BG 27/077 (also known as Denim Drift).

“Our review of international architecture, fashion and design trends revealed that blue is the colour of the moment. To make it relevant for your home, the team chose a blue that works as well in a kitchen as it does in a bedroom. Denim Drift, is the must-have colour for 2017. It will look great on your wall!”

Quote from Heleen van Gent Creative Director Dulux’s Global Aesthetics Center.

You can see more of this years colour schemes here:
Dulux Trade website or here:
https://www.dulux.co.uk/en/articles/colour-futures-2017.

Paint Calculator

If you would like to use the colour of the year (87BG 27/077) or any other colour you need to buy and need to work out how much you need to buy, use Property Decoratings FREE Paint Calculator.

Tags: , , , , , , , , , , , , , , , , , ,
Posted in Decorating, News | No Comments »


Making and using a water level :: Posted by: Admin on January 13th, 2016

Making and using a water level

Water levels can come in very useful when you need to make a level line across a big expanse, such as in a room and a level simply won’t do. You can buy laser levels but they can be expensive and you may only require it once, this post describes how to make a cheap water level.

Water levels can be used for things such as dado and picture rails, wallpaper borders etc.

close up water level graphic

Making a water level

To make a water level is fairly straightforward, you will need the following items.

  • A long length of clear tubing
  • Water
  • Something to bung ends of tube (optional)
  • Funnel (optional)

You will need a length of clear tubing, long enough to reach around your work area, such as a room. The tube needs to be clear so you can see the water, so a garden hose wouldn’t be any good as it isn’t transparent.

Once you have your length of tubing you need to fill it with water. This can be done by using a funnel in one end of the tube and running water into it to fill the tube. You can also try the syphon method, but what ever you find works best for you. Make sure that there are no air bubbles in the length of tube, if there are work them out to an open end.

Don’t fill the tube fully as you will need to allow the water to move without it coming out all over the place and for it to settle to get the level.

Once the tube is filled enough you will need to stop the water coming out again, this can be done simply by placing your thumb over the end or a bung of some kind if you have one.

Using a water level

Now that you have made your water level you are ready to use it. You will need a starting point, this can be achieved by measuring and making a pencil mark, or maybe using an existing level, such as a dado rail, it could even be something in another room if the tube is long enough. For example if you want to make sure the dado rail is the same in two rooms. This will be your starting point.

You will need a second person to help you with using the level. One stays at the original level point whilst the other uses the level and marks the wall at the level.

The person holding the ‘fixed’ end, that is the original level mark stays holding the tube at this point, whilst the second person moves to a new point and holds the tube against the wall. The first person instructs the second person to move up or down until the water is level with the original mark, the second person can then mark the wall level with the water in the tube, thus giving a level line.

Continue doing this in several places as required. Remember not to lift tube too high without having end blocked as it will flow out. You can then if required draw a line and join up the marks.

water level grapgic

Tags: , , , , , , , , , ,
Posted in Building, Decorating, DIY Tips, Handyman tips, Woodwork | No Comments »


DIY jobs – The right tool for the job :: Posted by: Admin on July 22nd, 2014

Hammer and screw

DIY jobs – The right tool for the job

When it comes to tackling DIY jobs it is best to be planned and prepared, whether it be a building job, gardening, a simple handyman job, plumbing or woodworking job, it is best to be prepared with the correct tools. By using the wrong tool for the job you run the risk of personal injury, damaging equipment or the job you are working on, and more often than not using the wrong tool makes the job harder to do and makes the job take longer to complete.

The right tools for the job

It maybe an old saying and a bit of a cliche but, by having the right tool for the job, will make the job far easier, safer and produce a far superior job. Rather than struggling without the correct tools and in an unsafe way and finishing up with a botched job that you’ll more than likely end having to redo, or calling in a professional to do the job properly for you.

A clean workspace is a safe workspace

If you have a clean environment to work in, without clutter and dangerous hazards such as extension leads and tools all over the floor, the DIY job will be a far safer place to work and a easier place to work, so you will enjoy doing some DIY rather than hate it and shudder at the thought of any DIY tasks. It doesn’t take long to move stuff out of the way and tidy up.

Be prepared

Take time to think about the job, gather the tools you will need, remove any dangers (this includes small children and pets) from your work area. Think about how you are going to do the job, have you got everything that you require to complete the job, the last thing you want to do is have to rush out and buy something in the middle of the job.

If you are doing a plumbing job don’t forget to turn off any water supply before removing taps or cutting pipes. Make sure electrical supplies are turned off before touching wires or removing socket face plates.

Gardening

If you decide to do a DIY job in the garden you should still think about the right tool for the job, and of course safety, such as using an extension lead with a RCD plug (residual-current device) so that if you run over it with the mover the power will be cut immediately.

Power tools

Lets face it we all love power tools, right? Well in the wrong hands they can cause serious injury and damage. However, having the correct power tool for the job will again make life easier, quicker and far more enjoyable.
Wallpaper and heat gun

Your stories

If you have any stories you would like to share, please do so in the comment box below. We would love to hear them,

Tags: , , , , , ,
Posted in Building, Decorating, DIY Tips, Gardening, Handyman tips, Plumbing, Woodwork | No Comments »


Boxing in pipework :: Posted by: Admin on January 13th, 2014

Boxing in pipework

Boxing in pipework

Pipes such as heating pipes or waste pipes can look ugly and can be a dust trap, they can be hard to clean and even paint around. The ideal solution is to box pipework in, once they are boxed in, the box can be decorated the same as the surrounding area, such as tiled or painted.

Typically to box in pipework you use timber battens and plywood or MDF, the battens are normally 2×1 inches (50×25 mm) or 2×2 (50×50 mm). The plywood or MDF can be 6 or 9 mm. All of the materials used will depend on the circumstances you plan to box the pipes in. You may even wish to use plasterboard and plaster the box.

Tools required for this job

  • Battens (2×1 or 2×2) (50×25 mm or 50×50 mm)
  • Drill
  • Drill bits
  • Screw or panel pins
  • Spirit level
  • Screwdriver / drill with screwdriver bit
  • Hammer
  • Plywood, MDF, Plasterboard
  • A pencil
  • Tape measure

How to box in pipes

Take the battens and hold them against the wall, use a spirit level to ensure they are upright and level, next drill holes through the wood into the wall, use rawl plugs and screws to fit the batten to the wall ensuring they are level.

Once the two wall battens are fixed you can cut the plywood to the correct size, fix a batten on the outside corner of one of the pieces of plywood, this will allow you to screw the other length of plywood to it giving the external corner a good strong fixing.

Decorating the box

Once the boxing in is done you can decorate the box, if you are painting the box, fill the screw holes and rub them down then apply the appropriate paint to match the surrounding area, you may have to prime the box first to seal the plywood. If you are tiling the boxing in, cut and fix the tiles to match in with to other tiles. You can add skirting boards to horizontal boxing in to match the room, and coving to vertical boxing in to make the box become part of the room and once decorated should like it has always been there.

Horizontal and vertical pipes

The same method for boxing in applies if you are boxing in horizontal or vertical pipes.

You can box in heating pipes, hot and cold water pipes, soil pipes and waste pipes to tidy them up and make them look part of the room.

Tags: , , , , , , , , ,
Posted in Building, Decorating, DIY Tips, Handyman tips, Plumbing, Woodwork | No Comments »


Top

My Paintbrush logo

Copyright © 2012 - 2017 Adrian Rayfield. All Rights Reserved.
This blog is protected via Copyscape Protected by Copyscape Online Infringement Checker Please do NOT infringe our copyright.
Entries (RSS) and Comments (RSS).
We currently have: 35 posts :: We also have 47 comments, why not have your say?

Admin - Log in